![]() The dried glue will not damage tools.Īfter each use, wipe the bottle’s lid and nozzle clean with a dry cloth. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. Make sure to read and follow directions if using a paint thinner. If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. For best results, allow 24 hours to cure. For lighter objects, try using rubber bands to hold the pieces together tightly. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. Clamp the Two Surfaces Together TightlyĬlamp It: Make sure the clamping pressure is distributed evenly across the surface.This actually strips the skin of its natural oils, which means the glue is more likely to stick. We do not recommend using any kind of alcohol or acetone. If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. If you do get the glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If you are predisposed to skin reactions, please take the extra precaution. In some instances, Gorilla Glue can be a skin sensitizer. We recommend wearing gloves or spreading the glue with a disposable brush. Glue It: Carefully apply onto the dry surface. Evenly Apply Gorilla Glue Onto the Dry Surface.For dense hardwoods, lightly dampen both surfaces prior to gluing. We recommend using a damp cloth or spraying with water. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into.ĭamp It: Lightly dampen one surface with water. Prepare your surfaces: All surfaces must be clean, dust free and tight fitting. The cap is attached to the side of the nozzle. To open a bottle larger than 2 ounces, cut the tip of the nozzle where it comes up to a point and starts to indent. If you’re using Original Gorilla Glue for the first time, or bonding a new type of material, we always recommend trying a test piece first.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |